airvo high flow set up

INSTALL WATER CHAMBER Remove the blue port caps from the chamber by pulling the tear tab. Adult HFNC HH HHF high flow Hospital humidification nasal NHF Pediatric respiratory therapy ventilation.

Pin On Home Care Products

BEFORE YOU BEGIN The AIRVO 2 should be fixed on a pole mounting tray 900PT405 below patient head height.

. Optiflow Nasal High Flow. Learn more here httpswwwfp. Move past the temperature setting menu.

37 oc Lmin 60 O 2 90 Lmin 60 Exit the menu settings. Open the packaging of the tube chamber kit heated breathing tube MR290 auto-fill chamber and adapter. People who complete this course will gain a basic understanding of how to set up Airvo 2 change the flow and temperature and fit an Optiflow nasal cannula.

Part 2 of the AIRVO 2 video is a step-by-step guide to setting up the AIRVO 2 and an introduction to our range of interfaces. Open the packaging of the tube chamber kit heated breathing tube MR290 auto-fill chamber and adapter. 3 When the target flow setting.

The standard High Flow TMtherapy set up for AIRVO 2 has two wall flow meters 0-15 and 0-70 Litresmin maximal flow. Adjust the O 2 flow meter to change O 2 value. Read the measured O 2 value.

Providing Optimal Humidity. FP Airvo 2 System. SETTING UP AIRVO 2 1.

The standard High Flow TMtherapy set up for AIRVO 2 has two wall flow meters 0-15 and 0-70 Litresmin maximal flow. INSTALL WATER CHAMBER Remove the blue port caps from the chamber by pulling the tear tab. Dependent on the required FiO2 and the flow rate specific for the patient the wall flow meter that allows for greater flow rates up to 70 Litresmin must be used to achieve the desired FiO2.

Delivering respiratory support for spontaneously breathing patients. If the setting menu is locked unlock by pressing 3 sec. AIRVO 2 Set-up Guide 000MB.

Full face masks designed for comfort and care. Flow rate child. SETTING UP AIRVO 2 1.

This course is not currently accredited. BEFORE YOU BEGIN The AIRVO 2 should be fixed on a pole mounting tray 900PT405 below patient head height. This will NOT affect the delivered patient flow.

Dependent on the required FiO2 and the flow rate specific for the patient the wall flow meter that allows for greater flow rates up to 70 Litresmin must be used to achieve the desired FiO2. High flow nasal therapy systems which deliver heated humidified high flow oxygen via nasal cannula or tracheostomy attachment such as but not necessarily limited to the Fisher and Paykel AIRVO 2 humidification system can deliver oxygen at flow rates of up to 60 litres per minute.

Pin On Palliative Care